Trial version. This site is still being built, so the list and the name may change. About

Topic

save battery

9 videos.

A cartridge that forgets its saves, or a console that loses the date, has often run its backup cell flat. Replacing it is a soldering job, and the dead cell may have leaked, so look for residue on the board first.

Where the cell is soldered in, buy one with tabs already fitted. Solder only the tabs and never put an iron on the cell itself. A shorted lithium cell can get hot. The iron burns, flux fumes need a window open, and old solder holds lead.

For cartridges, the Game Boy battery replacement lists a CR2025, flux and tweezers, and the Mega Drive save fix checks the joints with a multimeter. A Sega CD gets a new cell in part two of a repair series. The Dreamcast is built for a rechargeable clock cell and charges it, so a plain CR2032 must not be fitted. The Dreamcast teardown includes a battery swap, and the console has mains voltage inside.

  1. Hobbyist or repairer

    How To Replace a Gameboy Cartridge Battery

    The Retro Station

    How do you replace a Game Boy cartridge battery? The maker solders in a fresh CR2025 cell, using flux, a 3.8mm bit, tweezers and isopropyl alcohol for tidying the joints.

  2. Hobbyist or repairer

    N64 Controller Pak Battery Replacement

    Hexed Pedestrian

    Why has an N64 Controller Pak stopped holding saved games? The video goes through changing its battery, and the maker adds a notice that the work is done at the viewer's own risk.

  3. Sells parts or repairs

    Secrets To Fixing Faulty Game Boy Games!

    Voultar

    Dead Game Boy cartridges are the subject here, with the techniques the maker has shared with game shops and a lesson on replacing the failed save batteries.

  4. Sells parts or repairs

    NES Game Battery Replacement and Cleaning

    Retro Video Game Repair

    NES save battery replacement is the job here, along with cleaning the cartridge contacts. The channel also mentions cells with solder tabs for anyone who prefers to solder the battery in.