Hobbyist or repairer
LCD Replacement for Sharp PC-1251 (Also, Dock Repairs)
Sharp PC-1251 pocket computers are prone to dead LCDs, and Tech Tangents swaps in a new panel. The video also goes through repairs to the machine's dock.
Topic
11 videos.
Dim, lined or dead screens on handhelds and pocket computers are often swapped for a new panel or a modern kit. Check that the fault is the screen and not a ribbon cable or a power problem, since a new screen will not cure those.
For the original Game Boy, an IPS kit is a common route. The laminated Q5 kit for the DMG is sold direct by Funnyplaying, and the RIPS V5 adds a video output for an external monitor. A different job is the Sharp PC-1251 panel swap, which also covers dock repairs.
Fitting a kit may need a soldering iron, so expect burns and keep the room ventilated. Handheld lithium packs can catch fire when punctured, swollen or shorted.
Hobbyist or repairer
Sharp PC-1251 pocket computers are prone to dead LCDs, and Tech Tangents swaps in a new panel. The video also goes through repairs to the machine's dock.
Hobbyist or repairer
An original Game Boy (DMG) gets Funnyplaying's RetroPixel laminated Q5 IPS screen kit, with the seller's own picture-based install tutorial linked.
Hobbyist or repairer
A forgotten WonderSwan handheld from the early 2000s is restored and fitted with a screen mod by The Retro Future, and the maker links the screen used.
Hobbyist or repairer
Retro Renew looks at an IPS kit, the RIPS V5, for the original Game Boy DMG. It adds a backlit screen and a video output for an external monitor.
Hobbyist or repairer
The Atari Lynx II gets new capacitors and a BennVenn LCD in place of its original screen, with a hot air station and microscope among the tools listed.
Hobbyist or repairer
A torn funnyplaying GBA IPS kit ribbon has two repair routes, scraping back the solder mask to reach the traces or soldering onto the components instead.
Hobbyist or repairer
Snapped in two, refusing to charge and carrying a damaged screen cable, a Game Boy Advance SP gets a replacement screen and a repair.
Hobbyist or repairer
A Q5 IPS backlit screen kit with an on screen display goes into a Game Boy Color, billed as larger than the stock screen.
Hobbyist or repairer
Backlight and bivert chip modifications go into an original DMG-01 Game Boy bought as junk, which the maker restores and repairs first, then the colours are inverted back to normal.
Hobbyist or repairer
The Funnyplaying IPS kit made for the GBA SP (AGS-001) goes into an SP. The maker says there is one version of this kit, based on the v2 GBA kit.
Hobbyist or repairer
Fitting a 3.5 inch McWill LCD into a Game Gear replaces its original screen. The maker says the mod also offers VGA out, which this video does not show.